Stand in the window of an old front room and look at the panelling either side of the glass. In many Georgian and early Victorian houses, that panelling is a pair of folded timber shutters, painted over so often that nobody remembers they move. Before anyone measures up for secondary glazing, I would try to bring those shutters back into use. Releasing them is usually a repair. Making new ones is a change, and that is where consent comes in.
New to this? Start with Listed building questions answered
In my early-morning walk through a house reading its condensation, the windows were where the water gathered first. They are also where the warmth leaves. The people who built these houses knew that, and many of them answered it with joinery rather than glass.
What is folded into the reveal
If you have never opened a set of shutters, the parts have names worth knowing, because a joiner or a council officer will use them.
- The boxing. The panelled recess on each side of the window, deep enough to take the shutters when they are folded back. From the room it often looks like a decorative lining and nothing more.
- The leaves. The hinged panels themselves, usually two or more to a side, folding against each other like a screen. The widest leaf normally faces the room when the shutters are open.
- The back flap. The narrower leaf that sits furthest into the boxing. It is the one most often painted in, because nobody sees it.
- The shutter bar. A long iron bar, pivoted on one leaf, that swings across the closed shutters and drops onto a catch on the other side. If the bar survives, the shutters almost certainly once worked.
- The window board. The timber shelf at the foot of the window. A worn groove or a ghost of an old hinge here is a clue to how the window was once used.
None of this is unusual. It is simply hidden, and hidden things get decorated over.
Painted shut, nailed shut, or gone
Most shutters I would expect to find are in one of three states, and the council's view differs between them.
Bath and North East Somerset Council has a page on exactly this. Where shutters survive but have been "painted, nailed or screwed shut", it says, "releasing them does not require Listed Building Consent." It adds a sensible warning: "Releasing existing shutters may require the services of a suitably experienced and qualified professional, depending on their condition and the ease of releasing them."
Where the shutters have gone, the position changes. The same page says "Listed building consent is required and replacements should be of the correct style, material, and detailing to the originals." It also says the council will "support careful reinstatement of shutters where there is clear evidence of them having previously existed."
Releasing them is usually a repair. Making new ones is a change, and that is where consent comes in.
That is one council's published position. Yours may phrase it differently, and some councils say nothing on shutters at all. Ask your own.
Bath and North East Somerset makes that last point too: "Window shutters in English buildings are usually an internal feature, but there are exceptions."
How I would bring them back
This is the order I would follow in my own house. It is judgement, not a rule.
- Photograph everything first. Each side, folded and, if you can, open. The photographs are your record of what was there before anyone touched it.
- Find out what is holding them. Run a hand down the edges. Paint leaves a hard ridge along the joint; a nail or screw leaves a small bump or a filled dimple. A strip of beading pinned across the boxing is a common later fix.
- Cut the paint, do not prise it. A sharp blade drawn along the paint line, more than once, lets a leaf part from its neighbour without tearing the edge. A screwdriver levered into the joint is how mouldings split.
- Open one leaf at a time. Keep every hinge, screw and bar, and label where each came from. Old ironmongery is part of the joinery, not a spare part.
- Do not plane anything to make it close. A leaf that binds usually has too much paint on it or a hinge that has dropped. Taking wood off removes original fabric to cure a problem that is not in the wood.
- Stop when the timber argues. Splits, soft wood, seized hinges or a bar that will not seat are the point to call a joiner who knows old work.
Then, on the first cold evening, close them. The room will tell you more than I can.
Three layers against a cold window
Once the shutters work, it is easier to decide whether anything more is needed. When I wrote about draughty windows before winter, I put secondary glazing after repair and draught-proofing. Shutters belong in that same sequence, and the question is how they sit with the other layers.
| Layer | What it relies on | What I would check before relying on it |
|---|---|---|
| Original shutters, reopened | Joinery that is already there | That nothing has been cut away, and that the bar and hinges still hold |
| Heavy curtains | A pole or track fixed above the window | Where the fixings go: into new plaster, or into a cornice or architrave that matters |
| Secondary glazing | A new frame inside the window | That it still lets the shutters fold away and close |
The last row is the one that catches people out. Buckinghamshire Council lists secondary glazing among works that do not normally need consent, "as long as it doesn't require changes to window frames or shutters, and dividing bars align with any existing window bars". Bath and North East Somerset puts the combined effect in its own words: "When the shutter panels and louvres are closed, they can reduce heat loss through a window by more than 50%. Combined with secondary glazing, this can exceed 62%." Those figures are the council's, not mine. My point is simpler: a second pane that stops the shutters closing has taken away the first layer to add the second.
Where the law comes in
The test is in section 7 of the 1990 Act. Works to alter a listed building "in any manner which would affect its character as a building of special architectural or historic interest" need to be authorised (section 7 of the 1990 Act). Shutters are inside the house, but that does not take them outside the listing. GOV.UK's planning practice guidance says the listing covers the entire building, inside and out, and "may cover objects fixed to it".
The same guidance is plain that there is no form to fill in before a repair: "There is no obligation on anyone to apply for a Certificate of Lawfulness of Proposed Works." That cuts both ways. If you are sure a job is repair, you may go ahead; if you are wrong, the risk is yours. Where there is doubt, write to the council first. A short email with your photographs costs an evening, and the reply is worth keeping with the deeds.
When to bring someone in
Most painted-in shutters need patience more than expertise. I would ask for help when:
- the shutters are missing and you want to put new ones back, which, on Bath and North East Somerset's reading, means consent and evidence of what was there
- the boxing has been cut into for a radiator, pipes or wiring, or a window seat has been built across it
- you are planning secondary glazing and cannot see how it will clear the shutters
- the joinery is early, rare or richly moulded, and you would rather a specialist opened it
That is where looking at the whole window, rather than one layer of it, helps most. It is much of what I do on a first visit.
The quiet return of an old habit
There is something I like about a house being warmed by a thing it already owns. Closing the shutters at dusk is an old habit, and it is a good one to bring back.
Speak to Giles if you have found shutters behind the paint and want to know what to do with them: book a conversation, get in touch, call +44 (0)7737 745211, or send a WhatsApp voice note.
Giles Paul Shorter — ARB registered · RIBA Chartered Member · on the RIBA Conservation Register · 17+ years specialising in listed and historic buildings.
- Bath & North East Somerset Council — Reinstate existing and missing shutters ↗ (accessed 2026-11-15)
- Buckinghamshire Council — When consent may not be required (listed buildings) ↗ (accessed 2026-11-15)
- Planning (Listed Buildings and Conservation Areas) Act 1990, section 7 — Restriction on works affecting listed buildings ↗ (accessed 2026-11-15)
- GOV.UK — Planning practice guidance: Conserving and enhancing the historic environment ↗ (accessed 2026-11-15)
Text © 2026 SOANE Architects Ltd. You’re welcome to quote a short extract with a credit and a link back. Photographs belong to their photographers and are credited beneath each image.